3D Lights REDUX 
Light Settings for CIRP Stalwart

Go to to the CIRP Stalwart "aircraft.cfg" file.  Look for [Lights]. Put either one of these two in that place. This will give your Stalwart 3D REDUX lights if you have the program installed. You can get it at: www.shockwaveproductions.com  
 

Jeff's Lights:
(More "flare" when you are in the cockpit, but more light in front of the vehicle)


[LIGHTS] 
//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing 6=taxi, 7=recognition, 8=wing, 9=logo, 10=cabin
light.0 = 3,   9.3, -2.1,  0.6, fx_shockwave_landing_light_no_flare, // fx_navwhi,
light.1 = 3,   9.3,  2.2,  0.6, fx_shockwave_landing_light_no_flare, // fx_navwhi,
light.2 = 3,  10.3, -3.6,  1.4, fx_navwhi,
light.3 = 3,  10.3,  3.7,  1.4, fx_navwhi,
light.4 = 3, -10.2,  3.3,  1.1, fx_navred,
light.5 = 3, -10.2, -3.5,  1.1, fx_navred,
light.6 = 4,   4.4 , 0.0 , 3.0, fx_vclight,
light.7 = 8, -10.2,  3.3,  1.1, fx_navredh, //Brake lights
light.8 = 8, -10.2, -3.5,  1.1, fx_navredh, //Brakes lights
light.9 = 9, -10.2,  3.0,  1.1, fx_navwhi,  //Reverse drive lights
light.10= 9, -10.2, -3.1,  1.1, fx_navwhi,  //Reverse drive lights
light.11=10, -12.0,  4.0,  0.0, fx_smoke_engin_STALWART.fx ,


Doug's Lights

(Less "flare" when you are in the cockpit, but less light in front of the vehicle) Doug adds light on the roof.

[LIGHTS] 
//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing 6=taxi, 7=recognition, 8=wing, 9=logo, 10=cabin

//First=Light Type
//Second=fore and aft position use from middle - = back, + = forward
//Third=- = left and + = right
//Forth=-=Down, +=Up

light.0 = 3,   7.0, -2.1,  -1.6, Fx_shockwave_landing_light_short  
light.1 = 3,   7.0,  2.2,  -1.6, Fx_shockwave_landing_light_short 
light.2 = 3,  10.5, -3.6,  1.4, fx_navwhi,
light.3 = 3,  10.3,  3.7,  1.4, fx_navwhi,
light.4 = 3, -10.2,  3.3,  1.1, fx_navred,
light.5 = 3, -10.2, -3.5,  1.1, fx_navred,
light.6 = 4,   4.4 , 0.0 , 3.0, fx_vclight,
light.7 = 8, -10.2,  3.3,  1.1, fx_navredh, //Brake lights
light.8 = 8, -10.2, -3.5,  1.1, fx_navredh, //Brakes lights
light.9 = 9, -10.2,  3.0,  1.1, fx_navwhi,  //Reverse drive lights
light.10= 9, -10.2, -3.1,  1.1, fx_navwhi,  //Reverse drive lights
light.11=10, -12.0,  4.0,  0.0, fx_smoke_engin_STALWART.fx ,
light.12 = 3,   5,  0,  3, Fx_shockwave_landing_light_short // Shockwave light, // fx_navwhi,